製品情報

ST002 Speed-pass gate

ST002 Speed-pass gate
商品番号 : ST002速通门
13800000000
产品详情

ST002 Speed-pass gate

product description:


Product size: length 1400 * width 180 * height 980MM

Material: All made of 304 stainless steel

Process: Laser cutting, CNC bending, fine grinding

Mechanical structure: anti-collision design, extremely high stability and low noise

Movement body: electromagnetic clutch and angle encoder with accuracy less than 1 °

Circuit board: Designed with industrial-grade ARM chips, powerful, and suitable for all kinds of places with heavy dust, heavy humidity, and large temperature changes

Characteristics: If the swing arm is not opened, if it breaks in forcibly, the swing arm will rotate after a certain angle to buffer and then immediately lock; the problems of breakage of the swing arm and damage to the movement of the traditional swing gate are completely avoided.


Traffic direction: two-way traffic

Movement power supply: DC24 ± 10%

Movement reliability: 5 million times without failure

Effective length of swing arm: 300MM

Channel width: 700MM

Infrared sensor: Highly durable infrared sensor is used to accurately determine the pedestrian walking condition

Card reader installation position: 2

Controller installation position: 1

Opening signal: relay signal input

Passing speed: about 30 people / minute

Mode selection: two modes: normally open / normally closed

Working environment: indoor, outdoor

Temperature: -30 ℃ ~ 60 ℃

Humidity: 5% to 90%

Weight: about 70Kg


Several pairs of infrared sensors are used to effectively monitor the traffic conditions of pedestrians and make them pass the barrier.

The combined effect of mechanical clutch and infrared sensor can effectively prevent people from being pinched by the swing arm. It is safe and reliable and suitable for use in various places.

The swing arm speed can be adjusted according to the characteristics of the actual use place, and the operation is simple.

Anti-backlash, reverse swipe card into the channel, swing arm automatically closes

After power failure, the swing arm is in a non-resistance state and can be easily pushed, that is to say, it meets the fire evacuation requirements

With automatic reset function, that is, after obtaining the permission to pass the brake, the product does not pass within the set time.

Waterproof, sun-proof, cold-resistant and high-temperature resistant.

With the identification system, effective access control can be achieved.

It has a unified and standard external electrical interface, which can be freely connected with a variety of read-write devices, which is convenient for system integration



产品介绍:


产品尺寸:长1400*宽180*高980MM

材料:全部采用304不锈钢

工艺:激光开料,数控折弯制作,精细打磨

机械结构:防冲撞设计,稳定性极高,噪音极小

机芯主体:电磁离合器以及精确度远小于1°的角度编码器

电路板:采用工业级ARM芯片设计而成,功能强大,并且适合各种灰尘大,湿气重,气温变化大的场所

特性:摆臂未打开的情况下,如果强行闯入,摆臂转动一定的角度进行缓冲后,立即锁止;彻底避免传统摆闸所出现的摆臂断裂、机芯损害的问题。


通行方向:双向可通行

机芯工作电源:DC24±10%

机芯可靠性:500万次无故障

摆臂有效长度:300MM

通道宽度:700MM

红外传感器:采用高耐用的红外传感器,准确判断行人行走状况

读卡器安装位:2

控制器安装位:1

开闸信号:继电器信号输入

通行速度:约30人/分钟

模式选择:常开/常闭两种模式供选择

工作环境:室内、室外

温度:-30℃~60℃

湿度:5%~90%

重量:约70Kg


采用数对红外感应器,有效监测行人的通行状况,做到人过关闸。

机械离合与红外感应器的综合作用,可有效防止摆臂夹人现象,做到安全可靠,适合各个场所使用。

摆臂速度可根据实际使用场所的特点进行调节,操作简易。

防反冲,反向刷卡进入通道,摆臂自动关闭

断电后,摆臂呈无阻力状态,可轻易推动,即符合消防疏散要求

具有自动复位功能,即获得过闸权限后,在设定的时间内没有过闸,本产品自动取消本次权限,恢复到锁定状态。
防水、防晒、耐寒、耐高温。

配合身份识别系统,可实现行之有效的门禁管理。

具有统一、标准的对外电气接口,可与多种读写设备自由联接,便于系统集成。



网站关键词:
车牌识别系统,国外英文车牌识别系统,人脸识别系统,广州车牌识别,广州停车场系统,智慧停车,智慧社区,智能停车场系统,人行通道系统,人脸识别通道闸系统,无人值守收费系统,无人值守称重系统,无人值守车牌识别系统,机器人收费系统,无人值守地磅管理系统,部分海外国家车牌识别系统,全球车牌识别系统,智慧社区翼闸摆闸三辊闸管理系统,智慧工地通道管理系统,出入口控制类产品研发生产开发定制。
联系方式:
广州市御鑫电子科技有限公司
联系地址:广州市天河区东圃镇前进街宦溪北路27号工业区三楼
联系电话:400-008-3595    020-23316469  22308587    13527802958
联系邮箱:1694159030@.qq.com     技术服务热线:13640748518